Alle danske modelpiloters forum

 
Brugeravatar
Krolle Erik
Emnestarter
Indlæg: 799
Tilmeldt: 03 feb 2008 19:49
Geografisk sted: Nykøbing Mors
Kontakt:

SOLGT SOLGT

08 apr 2017 17:40

Turnigy Rotomax 100cc el-motor med 300A Fatboy regulator (max.15s), programmeringsbox samt manual, sælges.
Propelborelære medfølger også.
Lidt data på motoren:
12s, 167k/v, max. 170A, propel 27/12
Yder ca. 8 KW
Vægt 2080 gram
Sidder i øjeblikket i en Krill YAK55 på 260cm og 13kg.

Billeder kommer senere, da drivlinien stadig sidder i modellen.

Sælges samlet for kr. 2000,-

Tlf./sms 23 73 97 34 eller i tråden/PM
Senest rettet af Krolle Erik 10 jul 2017 16:55, rettet i alt 4 gange.
 
Brugeravatar
Krolle Erik
Emnestarter
Indlæg: 799
Tilmeldt: 03 feb 2008 19:49
Geografisk sted: Nykøbing Mors
Kontakt:

Re: Rotomax 100cc m/300A regulator og prog. box

10 apr 2017 20:45

Senest rettet af Krolle Erik 28 apr 2017 17:23, rettet i alt 2 gange.
 
Brugeravatar
Krolle Erik
Emnestarter
Indlæg: 799
Tilmeldt: 03 feb 2008 19:49
Geografisk sted: Nykøbing Mors
Kontakt:

Re: Rotomax 100cc m/300A regulator og prog. box

28 apr 2017 17:03

Our most powerful ESC now with a more compact design, wider voltage range and lower price! the Turnigy Fatboy V2 speed controller is rated at a massive 300 Amp continuous current draw and 380 Amp burst!

The Fatboy V2 features a large aluminum heat sink case, dual 8AWG input wires, 8AWG output wires for the motor and anti-spark protection.

The optional programming box (sold separately, see related items below) makes setup of the Turnigy Fatboy fast and easy. This ESC is suited to large scale 100cc plus electric conversions.

Specs.
Voltage: 18.5V-55.5V (4s-15s Lipo)
Current: 300A (380A surge within 10 seconds)
BEC: No BEC (Opto)
Size: 120mm x 72.5mm x 27mm
Weight: 406g

Programming Features
Auto detect Lipo cells
Fully Programmable LVC
Cutoff type
Brake type
Timing advance
Start up type
Governor mode

WARNING
This ESC is suited to R/C model applications only. Do not attempt to use it to power Push Bikes, Mountain boards, go-karts or similar machines. The programming logic is only designed for R/C Plane and Heli use. No warranty will be offered for incorrect use of this item
Senest rettet af Krolle Erik 28 apr 2017 17:20, rettet i alt 4 gange.
 
Brugeravatar
Krolle Erik
Emnestarter
Indlæg: 799
Tilmeldt: 03 feb 2008 19:49
Geografisk sted: Nykøbing Mors
Kontakt:

Re: Rotomax 100cc m/300A regulator og prog. box

28 apr 2017 17:06

Upgrade your 100cc size gas engine model with the Turnigy RotoMax 100cc Brushless outrunner motor. This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of fuel.

When combined with a 12s Lipoly battery, 27x12 Propeller and a 250Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.

This motor is specifically suited for carbon fiber & wooden propellers and features an IC style 6 bolt hole design. The shaft has also been tapped to suit a 5mm bolt to make fitting a spinner of your choice easy.

Spec.
Battery: 12 Cell / 44.4V
RPM: 167kv
Max current: 170A
Watts: 7992w
No load current: 44V/4.5A
Internal resistance: 0.021 ohm
Weight: 2074g
Pole Count: 24
Diameter of shaft: 10mm
Suggested ESC: 250A 12S Compatible
Suggested Prop: 27x12
 
Brugeravatar
Krolle Erik
Emnestarter
Indlæg: 799
Tilmeldt: 03 feb 2008 19:49
Geografisk sted: Nykøbing Mors
Kontakt:

Re: Turnigy Rotomax 100cc m/300A regulator og prog. box

03 jun 2017 19:05

??
 
Brugeravatar
Krolle Erik
Emnestarter
Indlæg: 799
Tilmeldt: 03 feb 2008 19:49
Geografisk sted: Nykøbing Mors
Kontakt:

Re: SOLGT SOLGT

10 jul 2017 16:55

SOLGT SOLGT